Handpieces and Controls



  Foredom HP4-817 Control Unit, 115 Volt

Retail Price: $490.00
You save: $140.00  (29%)
Our Price: $350.00

Foredom HP4-817 Control Unit, 115 Volt

Foredom HP4-817 Control Unit, 115 Volt. Control Unit Front Panel Features: Dial sets precise speed and maximum torque shown on digital display Two handpiece ports. Port in back is for Brushless Handpiece. Port in front is for optional brush type handpiece Foot control auto cruise Forward or reverse rotation Dial or foot speed control Built-in overload protection Control Unit Specifications: Width: 5.4" Depth: 9.1" Height: 7" Hertz/Amps: 50/60 Hz, 100VA, This control is available here separately and comes supplied in all Foredom Brushless Micromotor Kits: K.1050, K.105015, K.1053, K.105318, K.1054, K.105418, K.105419, K.105420, K.1055 and K.105518.
Model : HP4-817 Manufacturer : Foredom
  Foredom HP4-817-2 Control Unit, 230 Volt

Retail Price: $490.00
You save: $140.00  (29%)
Our Price: $350.00

Foredom HP4-817-2 Control Unit, 230 Volt

Foredom HP4-817-2 Control Unit, 230 Volt. Use Product Options Menu to Select Plug Option: 115 Volt (Domestic Model) North American Plug (HP4-817), UK Plug CE Model (HP4-817-21), Continental European Plug CE Model (HP4-817-22) or Australian Plug (HP4-817-26) Control Unit Front Panel Features: Dial sets precise speed and maximum torque shown on digital display. Two handpiece ports. Port in back is for Brushless Handpiece. Port in front is for optional brush type handpiece. Foot control auto cruise. Forward or reverse rotation. Dial or foot speed control. Built-in overload protection Control Unit Specifications: Width: 5.4" Depth: 9.1" Height: 7" Hertz/Amps: 50/60 Hz, 100VA, This control is available here separately and comes supplied in all Foredom Brushless Micromotor Kits: K.1050, K.105015, K.1053, K.105318, K.1054, K.105418, K.105419, K.105420, K.1055 and K.105518ac
Model : HP4-817-2 Manufacturer : Foredom
  Foredom HP4-917 Control Unit, 110/120 or 220/240 Volt

Retail Price: $210.00
You save: $21.00  (10%)
Our Price: $189.00

Foredom HP4-917 Control Unit, 110/120 or 220/240 Volt

Foredom HP4-917 Control Unit, 110/120 or 220/240 Volt. Control unit that comes supplied in micromotor kits K.1020, K.1070, K.1080, and K.1090. The HP4-917 Control Unit front has switches for On/Off, Forward/ Reverse Rotation, and Manual/Foot Speed Control. Overload Protection light comes on and alarm sounds if the motor ever stalls. Control Unit back has a voltage selector switch for choosing 110/120 or 220/240 volt operation and receptacles for the Variable Speed Foot Control or Optional On/Off Foot Switch.Specifications: Width: 4-3 8", Depth: 5-3 4", Height: 3-3 4", Output: DC 30V/1.2 A.This control is available here separately and comes supplied in the following Foredom Micromotor Kits:K.1020 High Torque Micromotor KitK.1070 High Speed Rotary Micromotor KitK.1080 Hamer Micromotor Kit
Model : HP4-917 Manufacturer : Foredom
  Foredom HP4-927 Optional On/Off Foot Switch

Retail Price: $26.00
You save: $2.60  (10%)
Our Price: $23.40

Foredom HP4-927 Optional On/Off Foot Switch

Foredom HP4-927 Optional On/Off Foot Switch. Optional on/off foot switch for use with Kits K.1020, K.1070, K.1080 and K.1090. This optional foot switch does not come in any of the micromotor kits. It is available here separately. Plugs into back of HP4-917 Control Unit and allows operator to turn the motor on and off without changing the speed set by the dial.
Model : HP4-927 Manufacturer : Foredom
  Foredom HP4-960 Variable Speed Foot Control

Retail Price: $63.00
You save: $6.30  (10%)
Our Price: $56.70

Foredom HP4-960 Variable Speed Foot Control

Foredom HP4-960 Variable Speed Foot Control. Replacement foot control for Kits K.1020, K.1070, K.1080 and K.1090. This variable speed foot control comes supplied in micromotor kits K.1020, K.1070, K.1080 and K.1090. Offered here for replacement. Works with control box HP4-917 to vary speed from low to full up to 38,000 RPM.
Model : HP4-960 Manufacturer : Foredom
  Foredom HP7-7060 Variable Speed Foot Control

Retail Price: $60.00
You save: $1.05  (2%)
Our Price: $58.95

Foredom HP7-7060 Variable Speed Foot Control

Foredom HP7-7060 Variable Speed Foot Control. Replacement foot control for Brushless Kit K.1050. This variable speed foot control comes supplied in micromotor kit K.1050. Offered here for replacement. Works with control box HP4-717 to vary speed from 1,000 to 50,000 RPM.
Model : HP7-7060 Manufacturer : Foredom
  Foredom HPMH-011 Handpiece, Hammer

Retail Price: $650.00
You save: $65.00  (10%)
Our Price: $585.00

Foredom HPMH-011 Handpiece, Hammer

Foredom HPMH-011 Handpiece, Hammer. Hammer handpiece for stone setting and engraving. Comes in Kit K.1080. This reciprocating handpiece has a slender, contoured grip and impact adjusting ring for precise hammering work. It operates from 0-5,000 strokes per minute. The force of the impact of this reciprocating handpiece can be adjusted from light to full by turning the metal ring while the motor is off or running. The speed of the hammer action can also be varied from 0-5,000 strokes per minute with the manual dial on the control box, or the optional foot pedal. Used with the Graver Holder, the MH-011 handpiece becomes a precision power engraver, without the need for an air compressor or a flexible shaft drive.Specifications: 6-1/4" overal length, 9/16" grip dia., 1" motor dia., 13 oz/369 gr., 1.5 amps (115v), .75 amps (230v). CE marked.Comes supplied in Kits K.1080 and K.1090. Also works with the same HP4-917 Control Unit that comes with Micromotor Kit K.1020.
Model : HPMH-011 Manufacturer : Foredom
  Foredom No. MH-120 High Torque, Chuck Style

Retail Price: $325.00
You save: $32.50  (10%)
Our Price: $292.50

Foredom No. MH-120 High Torque, Chuck Style

Foredom H.MH-120 High Torque, Chuck Style. Unique chuck style, high torque handpiece. Comes in Kit K.1020. The H.MH-120 features extra power and a geared 3-jaw #0 chuck that takes any size rotary accessory or drill bit with shanks up to 5/32" (4mm) diameter. Used for deburring cast pieces, polishing, taking down weld seams, and moderate to heavy grinding and rapid stock removal in metal and wood. It comes with a chuck key in molded plastic handle.Handpiece specifications: length= 8-3/32" / 205.8 mm, weight=1-lb. 2-oz / 510 grams, diameter= 1-1/64" / 26mm at chuck end, CE compliant. Comes supplied in Kit K.1020 and works with the same HP4-917 Control Unit that comes with Micromotor Kits K.1070, K.1080 and K.1090.
Model : H.MH-120 Manufacturer : Foredom
  Foredom No. MH-150 Handpiece, Brushless

Retail Price: $600.00
You save: $60.00  (10%)
Our Price: $540.00

Foredom No. MH-150 Handpiece, Brushless

Brushless, high torque handpiece runs up to 50,000 RPM. Comes in Kit K.1050. Handpiece H.MH-150 features a brushless motor design with a high torque motor that is powerful even at minimum speeds. The sealed housing eliminates dust, noise, and vibration, and there s never a need to replace carbon brushes. Comes with 2.35mm (3/32") collet. Included in Micromotor Kit K.1050. Handpiece does NOT work with Foredom's other Micromotor HP4-917 Control Unit Specifications: 6.3" overall length, .75" grip diameter, 1.06" motor dia. 8.4 oz/237.7 gr., DC32V/3.4A Maximum Torque/Watts Output- 10oz-in (70mNm)/230.
Model : H.MH-150 Manufacturer : Foredom
  Foredom No. MH-170 Handpiece, Rotary

Retail Price: $230.00
You save: $23.00  (10%)
Our Price: $207.00

Foredom No. MH-170 Handpiece, Rotary

Foredom H.MH-170 Handpiece, Rotary. High speed rotary handpiece runs up to 38,000 RPM. Comes in Kit K.1070. The H.MH-170 High Speed Rotary Handpiece has a slender, contoured grip for precise and very high speed work (up to 38,000 rpm) and quick release rotary type chuck. It has a fan cooled, brush-type continuous duty motor that runs cool and vibration free with permanently lubricated, shielded ball bearings that require no lubrication. It comes with a 2.35mm (3/32") collet that is easy to install and change with supplied collet changing wrench. Optional 1/8" and 3mm collets are available separately. Bur changes are quick and easy with a simple twist of the front section of the Handpiece. A selection of collet adapters is available for simplifying changes between accessories with different shank sizes.Comes supplied in Kits K.1070 and K.1090. Also works with the same HP4-917 Control Unit that comes with Micromotor Kits K.1020 and K.1080.Specifications: 6.2" overall length, 5/8" grip diameter, 1" motor diameter, 7.3 oz./208 gr., DC30V/1.2A. CE
Model : H.MH-170 Manufacturer : Foredom